|
|
Your Shopping Cart is Empty
|
|
|
Note: order only in English
|
|
|
 |  |  |  | | This DVD FAQs is collected from books, magazines, web forums as well as many other conferences and presentations, to help answer any DVD questions you may have. | | What is DVD? | DVD is the new generation of optical disc storage technology. DVD is essentially a bigger, faster CD that can hold cinema-like video, better-than-CD audio, still photos, and computer data. DVD aims to encompass home entertainment, computers, and business information with a single digital format. It has replaced laserdisc, is well on the way to replacing videotape and video game cartridges, and could eventually replace audio CD and CD-ROM. DVD has widespread support from all major electronics companies, all major computer hardware companies, and all major movie and music studios. With this unprecedented support, DVD became the most successful consumer electronics product of all time in less than three years of its introduction. In 2003, six years after introduction, there were over 250 million DVD playback devices worldwide, counting DVD players, DVD PCs, and DVD game consoles. This was more than half the numbers of VCRs, setting DVD up to become the new standard for video publishing.
It's important to understand the difference between the physical formats (such as DVD-ROM and DVD-R) and the application formats (such as DVD-Video and DVD-Audio). DVD-ROM is the base format that holds data. DVD-Video (often simply called DVD) defines how video programs such as movies are stored on disc and played in a DVD-Video player or a DVD computer. The difference is similar to that between CD-ROM and Audio CD. DVD-ROM includes recordable variations: DVD-R/RW, DVD-RAM, and DVD+R/RW. The application formats include DVD-Video, DVD-Video Recording (DVD-VR), DVD+RW Video Recording (DVD+VR), DVD-Audio Recording (DVD-AR), DVD Stream Recording (DVD-SR), DVD-Audio (DVD-A), and Super Audio CD (SACD). There are also special application formats for game consoles such as Sony PlayStation 2 and Microsoft Xbox. | | What do the letters DVD stand for? | All of the following have been proposed as the words behind the letters DVD.
*Delayed, very delayed (referring to the many late releases of DVD formats)
*Diversified, very diversified (referring to the proliferation of recordable formats and other spinoffs)
*Digital venereal disease (referring to piracy and copying of DVDs)
*Dead, very dead (from naysayers who predicted DVD would never take off)
*Digital video disc (the original meaning proposed by some of DVD's creators)
*Digital versatile disc (a meaning later proposed by some of DVD's creators)
*Nothing
And the official answer is? "Nothing." The original acronym came from "digital video disc." Some members of the DVD Forum tried to express that DVD goes far beyond video by retrofitting the painfully contorted phrase "digital versatile disc," but this has never been officially accepted by the DVD Forum as a whole. The DVD Forum decreed in 1999 that DVD, as an international standard, is simply three letters. After all, how many people ask what VHS stands for? (Guess what, no one agrees on that one either.) | | What's the quality of DVD-Video? | DVD has the capability to produce near-studio-quality video and better-than-CD-quality audio. DVD is vastly superior to consumer videotape. However, quality depends on many production factors. As compression experience and technology improves we see increasing quality, but as production costs decrease and DVD authoring software becomes widely available we also see more shoddily produced discs. A few low-budget DVDs even use MPEG-1 encoding (which is no better than VHS) instead of higher-quality MPEG-2.
DVD video is usually encoded from digital studio master tapes to MPEG-2 format. The encoding process uses lossy compression that removes redundant information (such as areas of the picture that don't change) and information that's not readily perceptible by the human eye. The resulting video, especially when it is complex or changing quickly, may sometimes contain visual flaws, depending on the processing quality and amount of compression. At average video data rates of 3.5 to 6 Mbps (million bits/second), compression artifacts may be occasionally noticeable. Higher data rates can result in higher quality, with almost no perceptible difference from the master at rates above 6 Mbps. As MPEG compression technology improves, better quality is being achieved at lower rates.
Video from DVD sometimes contains visible artifacts such as color banding, blurriness, blockiness, fuzzy dots, shimmering, missing detail, and even effects such as a face that "floats" behind the rest of the moving picture. It's important to understand that the term "artifact" refers to anything that is not supposed to be in the picture. Artifacts are sometimes caused by poor MPEG encoding, but artifacts are more often caused by a poorly adjusted TV, bad cables, electrical interference, sloppy digital noise reduction, improper picture enhancement, poor film-to-video transfer, film grain, player faults, disc read errors, and so on. Most DVDs exhibit few visible MPEG compression artifacts on a properly configured system.. If you think otherwise, you are misinterpreting what you see.
Some early DVD demos were not very good, but this is simply an indication of how bad DVD can be if not properly processed and correctly reproduced. In-store demos should be viewed with a grain of salt, since most salespeople are incapable of properly adjusting a television set.
Most TVs have the sharpness set too high for the clarity of DVD. This exaggerates high-frequency video and causes distortion, just as the treble control set too high on a stereo causes the audio to sound harsh. For best quality the sharpness control should be set very low. Brightness should also not be set too high. Some DVD players output video with a black-level setup of 0 IRE (Japanese standard) rather than 7.5 IRE (US standard). On TVs that are not properly adjusted this can cause some blotchiness in dark scenes. There may be an option in the player menu to use standard black level. DVD video has exceptional color fidelity, so muddy or washed-out colors are almost always a problem in the display (or the original source), not in the DVD player or disc.
DVD audio quality is superb. DVD includes the option of PCM (pulse code modulation) digital audio with sampling sizes and rates higher than audio CD. Alternatively, audio for most movies is stored as discrete, multi-channel surround sound using Dolby Digital or DTS audio compression similar to the digital surround sound formats used in theaters. As with video, audio quality depends on how well the processing and encoding was done. In spite of compression, Dolby Digital and DTS can be close to or better than CD quality. | | How do I put a PowerPoint presentation on DVD? | | There's not yet a feature in PowerPoint to export directly to video on DVD, but you can convert a PowerPoint presentation to stills or video for import into a DVD authoring program. Recent versions of PowerPoint allow you to save your slides as graphic images (JPEG or PNG files) that can be imported into a DVD authoring program that supports slideshows. The advantage of using the slideshow feature is that you can have the DVD player pause indefinitely on each still until you press the Enter or Play key on the remote control. (Note: make sure the authoring software supports true slideshows with "infinite stills," since many programs just render slides as video.) The disadvantage of using stills is that you won't get animations and other fancy PowerPoint effects. Alternatively you can record the PowerPoint presentation as a video file (use a PowerPoint add-in or a motion screen capture program) and import the video file into the DVD authoring program. This preserves the full visual effect but locks you into the timing you used when recording the presentation. Another alternative is 321 Studio's DVD X Point, which directly converts PowerPoint presentations (version 2002 only) to DVD slideshows. | | How do I copy my home video/film/photos to DVD? | This used to be almost impossible, but luckily for you it's getting cheaper and easier all the time.
For a simple video-to-DVD transfer you can buy a DVD video recorder ($500 to $3,000) and connect it to your VCR or camcorder. It works just like a VCR but it records onto a disc instead of tape.
For transferring photos or music, or for making a customized DVD with menus and chapters and other fun stuff, you'll need the following:
*A computer
*A DVD recordable drive ($100-$400, or it might come with the computer)
*DVD authoring software (usually comes with the drive or computer, or you can buy it.
Note: You must use authoring software. You can't just copy MPEG or AVI or JPEG files onto a disc and expect it to play in DVD players.
Then take the following steps
*If the video and pictures are not already in digital form (AVI, WMV, DivX, QuickTime, JPEG, and so on) you need to transfer them to your computer. For analog video, such as VHS and Hi8, you need a video capture device or a computer with built-in analog video input; for digital video such as DV or D8 you need a 1394/FireWire input on the computer. For film, first have it transferred to tape or digital video at a camera shop or video company (see a list at HomeMovieDay.com). For slides or photos, use a scanner (or rent scanning time at a place such as Kinkos).
*Import the video and audio clips into the DVD-Video authoring program. Many DVD authoring programs will convert and encode the video and audio for you. If not, you have to
*Encode the video into MPEG-2 (make sure the display frame rate is set to 29.97 for NTSC or 25 for PAL).
*Encode the audio into Dolby Digital (or, if your video is short enough that you have room on the disc, format the audio as 48kHz PCM). You can also use MPEG Level 2 audio, but it won't work on all players.
*Create some chapter points in your video tracks or let the DVD recording software do it for you.
*To put photos on the disc, use the slideshow feature in the authoring software or make each picture a menu. Most DVD authoring software will directly read TIFF, JPEG, BMP, and PhotoShop files.
*Create menus that link to your video clips and slideshows.
*Write your finished gem out to a recordable DVD ($2-$15).
Another option is to us do all the work for you at a reasonable fee. | | How much does it cost to produce a DVD? Isn't it more expensive than VHS? | VHS and CD-ROM can't be compared to DVD in a straightforward manner. There are basically three stages of costs: production, pre-mastering (authoring, encoding, and formatting), and mastering/replication.
DVD video production costs are not much higher than for VHS and similar video formats unless extra features of DVD such as multiple sound tracks, camera angles, seamless branching, etc. are employed.
Authoring and pre-mastering costs are proportionately the most expensive part of DVD. Video and audio must be encoded, menus and control information have to be authored and encoded, it all has to be multiplexed into a single data stream, and finally encoded in low level format. Typical charges for compression are $50/min for video, $20/min for audio, $6/min for subtitles, plus formatting and testing at about $30/min. A ballpark cost for producing a Hollywood-quality two-hour DVD movie with motion menus, multiple audio tracks, subtitles, trailers, and a few info screens is about $20,000. Alternatively, many facilities charge for time, at rates of around $300/hour. A simple two-hour DVD-Video title with menus and various video clips can cost as low as $2,000. If you want to do it yourself, authoring and encoding systems can be purchased at prices from $50 to over $2 million.
Another option is to have us author your next DVD project, at a reasonable fee of $250 - $500.
Videotapes don't really have a mastering cost, and they run about $2.40 for duplication. CDs cost about $490 to master and $0.50 to replicate by us. | | How is DVD doing? Where can I get statistics? | DVD did not take off quite as fast as some early predictions, but it has sold faster than videotape, CD, and laserdisc. In fact, before its third birthday in March 2000, DVD had become the most successful consumer electronics entertainment product ever.
Here are some predictions:
*InfoTech (1995): Worldwide sales of DVD players in 1997 will be 800,000. Worldwide sales of DVD-ROM drives in 1997 will be 1.2 million, with sales of 39 million drives in 2000.
*Toshiba (1996): 100,000 to 150,000 DVD-Video players will be sold in Japan between Nov. 1 and Dec. 31, 1996, and 750,000-1 million by Nov. 1, 1997. (Actual count of combined shipments by Matsushita, Pioneer, and Toshiba was 70,000 in Oct-Dec 1996.) Total worldwide DVD hardware market expected to reach 120 million units in the year 2000. Worldwide settop DVD player market will be 2 million units in the first year, with sales of 20 million in the year 2000.
*Pioneer (1996): 400,000 DVD-Video players in 1996, 11 million by 2000. 100,000 DVD-Audio players in 1996, 4 million by 2000.
*InfoTech (1996): 820,000 DVD-Video players in first year, 80 million by 2005.
*CEMA (1997): 400,000 DVD-Video players in U.S. in 1997, 1 million in 1998.
*Time-Warner (1996): 10 million DVD players in the U.S. by 2002.
*Paul Kagan (1997): 800,000 DVD players in the U.S. in 1997, 10 million in 2000, and 40 million in 2006 (43% penetration). 5.6 million discs sold in 1997, 172 million discs in 2000, and 623 million in 2006.
*C-Cube (1996): 1 million players and drives in 1997.
*BASES: 3 million DVD-Video players sold in first year, 13 million sold in 6th year.
*Dataquest (1997): over 33 million shipments of DVD players and drives by 2000.
*Philips (1996): 25 million DVD-ROM drives worldwide by 2000 (10% of projected 250 million optical drives).
*Pioneer (1996): 500,000 DVD-ROM drives sold in 1997, 54 million sold in 2000.
*Toshiba (1996): 120 million DVD-ROM drives in 2000 (80% penetration of 100 million PCs). Toshiba says they will no longer make CD-ROM drives in 2000.
*IDC (1997): 10 million DVD-ROM drives sold in 1997, 70 million sold in 2000 (surpassing CD-ROM), 118 million sold in 2001. Over 13% of all software available on DVD-ROM in 1998. DVD recordable drives more than 90% of combined CD/DVD recordable market in 2001.
*AMI (1997): installed base of 7 million DVD-ROM drives by 2000.
*Intel (1997): 70 million DVD-ROM drives by 1999 (sales will surpass CD-ROM drives in 1998).
*SMD (1997): 100 million DVD-ROM/RAM drives shipped in 2000.
*Microsoft (Peter Biddle, 1997): 15 million DVD PCs sold in 1998, 50 million DVD PCs sold in 1999.
*Microsoft (Jim Taylor, 1998): installed base of 35 million DVD PCs in 1999.
*Forrester Research (1997): U.S. base of 53 million DVD-equipped PCs by 2002. 5.2% of U.S. households (5 million) will have a DVD-V player in 2002; 2% will have a DVD-Audio player.
*Yankee Group (Jan 1998): 650,000 DVD-Video players by 1998, 3.6 million by 2001. 19 million DVD-PCs by 2001.
*InfoTech (Jan 1998): 20 million DVD-Video players worldwide in 2002, 58 million by 2005. 99 million DVD-ROM drives worldwide in 2005. No more than 500 DVD-ROM titles available by the end of 1998. About 80,000 DVD-ROM titles available by 2005.
*Screen Digest (Dec 1998): 125,000 DVD-Video player in European homes in 1998, 485,000 in 1999, 1 million in 2000.
*IRMA (Apr 2000): 12 million players will ship worldwide in 2000.
*Baskerville (Apr 2000): Worldwide spending on DVD software will surpass that of VHS by 2003. There will be a worldwide installed based of 625 million DVD players by 2010 (55% of TV households).
*Jon Peddie (Jun 2000): Almost 20 million DVD players will be sold in the U.S. in 2004.
*IDC (July 2000): 70 million DVD players and drives will be sold by year's end.
*Screen Digest (June 2000): European installed base of DVD-Video players (1998) 0.3m; (1999) 1.5m; (2000) 5.4m; (2003) 47.1m.
*Japanese Electronics and Information Technologies Association (December 2000): 37 million DVD players worldwide by 2001.
*DVD Entertainment Group (July 2001): Approximately 30 million DVD players sold in the U.S. by the end of 2001.
*Understanding & Solutions (April 2002): DVD player penetration in the UK could grow to 70% by 2006 (CD player penetration reached only 50% in the same time period after launch).
Here's reality:
*1997
*349,000 DVD-Video players shipped in the U.S. (About 200,000 sold into homes.)
*900 DVD-Video titles available in the U.S. Over 5 million copies shipped; about 2 million sold.
*Over 500,000 DVD-Video players shipped worldwide.
*Around 330,000 DVD-ROM drives shipped worldwide with about 1 million bundled DVD-ROM titles.
*60 DVD-ROM titles (mostly bundled).
*1998
*1,089,000 DVD-Video players shipped in the U.S. (Installed base of 1,438,000.)
*400 DVD-Video titles in Europe (135 movie and music titles).
*3,000 DVD-Video titles in the U.S. (2000 movie and music titles).
*7.2 million DVD-Video discs purchased.
*1999
*4,019,000 DVD-Video players shipped in the U.S. (Installed base of 5,457,000.)
*Over 6,300 DVD-Video titles in the U.S.
*About 26 million DVD-ROM drives worldwide.
*About 75 DVD-ROM titles available in the U.S.
*2000
*8.5 million DVD-Video players shipped in the U.S. (Installed base of 13,922,000.)
*About 46 million DVD-ROM drives worldwide.
*Over 10,000 DVD-Video titles available in the U.S.
*Belgium: 100 thousand installed base
*France: 1.2 million installed base
*Germany: 1.2 million installed base
*Italy: 360 thousand installed base
*Netherlands: 200 thousand installed base
*Spain: 300 thousand installed base
*Sweden: 120 thousand installed base
*Switzerland: 250 thousand installed base
*UK: 1 million installed base
*2001
*12.7 million DVD-Video players shipped in the U.S. (Installed base of 26,629,000.)
*Over 45 million DVD-ROM drives in the U.S.
*Over 90 million DVD-ROM drives worldwide.
*UK: 3 million installed base
*2002
*17 million DVD-Video players shipped in the U.S. (Installed base of 43,718,000.)
*Over 75 million DVD-ROM drives in the U.S.
*Over 140 million DVD-ROM drives worldwide.
*2003 (fall)
*16 million DVD-Video players shipped in the U.S. (Installed base of 73,300,000.)
*Over 27,000 DVD-Video titles available in the U.S.
For comparison, there were about 700 million audio CD players and 160 million CD-ROM drives worldwide in 1997. 1.2 billion CD-ROMs were shipped worldwide in 1997 from a base of about 46,000 different titles. There were about 80 million VCRs in the U.S. (89% of households) and about 400 million worldwide. 110,000 VCRs shipped in the first two years after release. Nearly 16 million VCRs were shipped in 1998. In 2000 there were about 270 million TVs in the U.S. and 1.3 billion worldwide. When DVD came out in 1997 there were under 3 million laserdisc players in the U.S.
For latest U.S. player sales statistics, see the CEA page at The Digital Bits. Other DVD statistics and forecasts can be found at IRMA, MediaLine, Twice. Industry analyses and forecasts can be purchased from Adams Media Research, Alexander & Associates, British Video Association, Cahners In-stat, Centris, Datamonitor, Dataquest, DVD Intelligence, eBrain, International Data Corporation (IDC), InfoTech, Jon Peddie Associates (JPA), Paul Kagan Associates, Screen Digest, SIMBA Information, Strategy Analytics, Understanding & Solutions and others. | | What are "regional codes," "country codes," or "zone locks"? | Motion picture studios want to control the home release of movies in different countries because theater releases aren't simultaneous (a movie may come out on video in the U.S. when it's just hitting screens in Europe). Also, studios sell distribution rights to different foreign distributors and would like to guarantee an exclusive market. Therefore they required that the DVD standard include codes to prevent playback of certain discs in certain geographical regions. Each player is given a code for the region in which it's sold. The player will refuse to play discs that are not coded for its region. This means that a disc bought in one country may not play on a player bought in another country. Some people believe that region codes are an illegal restraint of trade, but no legal cases have established this.
Regional codes are entirely optional for the maker of a disc. Discs without region locks will play on any player in any country. It's not an encryption system, it's just one byte of information on the disc that the player checks. Some studios originally announced that only their new releases would have regional codes, but so far almost all Hollywood releases play in only one region. Region codes are a permanent part of the disc, they won't "unlock" after a period of time. Region codes don't apply to DVD-Audio, DVD-ROM, or recordable DVD (see below for more detail).
Seven regions (also called locales or zones) have been defined, and each one is assigned a number. Players and discs are often identified by their region number superimposed on a world globe. If a disc plays in more than one region it will have more than one number on the globe.
Region 01
Canada, U.S., U.S. Territories.
Region 02
Albania, Andorra, Austria, Bahrain, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Canary Islands, Croatia, Cyprus, Czech Republic, Denmark, Egypt, Estonia, European Union, Faroe Islands, Finland, France, France, Georgia, Germany, Gibraltar, Greece, Greenland, Hungary, Iceland, Iran (Islamic Republic of) Iraq, Ireland, Israel, Italy, Japan, Jordan, Kuwait, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Macedonia (the Former Yugoslav Republic), Malta, Moldova, Principality of Monaco, Netherlands, Norway, Oman, Poland, Portugal, Qatar, Romania, Russian Federation, San Marino, Saudi Arabia, Slovakia, Slovenia,South Africa, Spain, Sweden, Switzerland, Syrian Arab Republic, Turkey, Ukraine, United Arab Emirates, United Kingdom, United Kingdom (Channel Islands) Vatican City State, Yemen, Yugoslavia
Region 03
Southeast Asia, East Asia (including Hong Kong)
Region 04
Australia, New Zealand, Pacific Islands, Central America, Mexico, South America, Caribbean
Region 05
Former Soviet Union, Indian Subcontinent, Africa (also North Korea, Mongolia)
Region 06
China
Region 07
Reserved
Region 08
Special international venues (airplanes, cruise ships, etc.) | | Notation and units | There's an unfortunate confusion of units of measurement in the DVD world. For example, a single-layer DVD holds 4.7 billion bytes (G bytes), not 4.7 gigabytes (GB). It only holds 4.37 gigabytes. Likewise, a double-sided, dual-layer DVD holds only 15.90 gigabytes, which is 17 billion bytes.
The problem is that the SI prefixes "kilo," "mega," and "giga" normally represent multiples of 1000 (10^3, 10^6, and 10^9), but when used in the computer world to measure bytes they generally represent multiples of 1024 (2^10, 2^20, and 2^30). Both Windows and Mac OS list volume capacities in "true" megabytes and gigabytes, not millions and billions of bytes
Most DVD figures are based on multiples of 1000, in spite of using notation such as GB and KB that traditionally have been based on 1024. The "G bytes" notation does seem to consistently refer to 10^9. The closest I have been able to get to an unambiguous notation is to use "kilobytes" for 1024 bytes, "megabytes" for 1,048,576 bytes, "gigabytes" for 1,073,741,824 bytes, and "BB" for 1,000,000,000 bytes.
This may seem like a meaningless distinction, but it's not trivial to someone who prepares 4.7 gigabytes of data (according to the OS) and then wastes a DVD-R or two learning that the disc really holds only 4.3 gigabytes!
Here's an analogy that might help. A standard mile is 5,280 feet, whereas a nautical mile is roughly 6,076 feet. If you measure the distance between two cities you will get a smaller number in nautical miles, since nautical miles are longer. For example, the distance from Seattle to San Francisco is about 4,213,968 feet, which is 798 standard miles but only 693 nautical miles. DVD capacities have similarly confusing units of measurement: a billion bytes (1,000,000,000 bytes) or a gigabyte (1,073,741,824 bytes). DVD capacities are usually given in billions of bytes, such as 4.7 billion bytes for a recordable disc. Computer files are measured in gigabytes. Unfortunately, both types of measurements are often labeled as "GB." So a 4.5-GB file (4.5 gigabytes) from a computer will not fit on a 4.7-GB disc (4.7 billion bytes), since the file contains 4.8 billion bytes.
To make things worse, data transfer rates when measured in bits per second are almost always multiples of 1000, but when measured in bytes per second are sometimes multiples of 1024. For example, a 1x DVD drive transfers data at 11.08 million bits per second (Mbps), which is 1.385 million bytes per second, but only 1.321 megabytes per second. The 150 KB/s 1x data rate commonly listed for CD-ROM drives is "true" kilobytes per second, since the data rate is actually 153.6 thousand bytes per second. This FAQ uses "kbps" for thousands of bits/sec, "Mbps" for millions of bits/sec (note the small "k" and big "M").
In December 1998, the IEC produced new prefixes for binary multiples: kibibytes (KiB), mebibytes (MiB), gibibytes (GiB), tebibytes (TiB), and so on. (More details at NIST, also released as IEEE Std 1541-2002) These prefixes may never catch on, or they may cause even more confusion, but they are a valiant effort to solve the problem. The big strike against them is that they sound rather silly. | | Who invented DVD and who owns it? Whom to contact for specifications and licensing? | DVD is the work of many companies and many people. DVD evolved from CD and related technologies. Some of the early proposals for "high-density CD" were made in 1993, and these efforts gradually coalesced into two competing proposed formats. The MMCD format was backed by Sony, Philips, and others. The SD format was backed by Toshiba, Matsushita, Time Warner, and others. A group of computer companies led by IBM insisted that the factions agree on a single standard. The combined DVD format was announced in September of 1995, avoiding a confusing and costly repeat of the VHS vs. Betamax videotape battle or the quadraphonic sound battle of the 1970s.
No single company "owns" DVD. The official specification was developed by a consortium of ten companies: Hitachi, JVC, Matsushita, Mitsubishi, Philips, Pioneer, Sony, Thomson, Time Warner, and Toshiba. Representatives from many other companies also contributed in various working groups. In May 1997, the DVD Consortium was replaced by the DVD Forum, which is open to all companies, and as of February 2000 had over 220 members. Time Warner originally trademarked the DVD logo, and has since assigned it to the DVD Format/Logo Licensing Corporation (DVD FLLC). The written term "DVD" is too common to be trademarked or owned. See section 6.2 and visit Robert's DVD Info page for links to Web sites of companies working with DVD.
The official DVD specification books are available after signing a nondisclosure agreement and paying a $5,000 fee. One book is included in the initial fee; additional books are $500 each. Manufacture of DVD products and use of the DVD logo requires additional format and logo licenses, for a one-time fee of $10,000 per format, minus $5,000 if you have already paid for the specification. (E.g., a DVD-Video player manufacturer must license DVD-ROM and DVD-Video for $20,000, or $15,000 if they have the spec.) Allowances are made for production houses and content providers to use the logo in conjunction with a licensed replicator, and for non-licensees to use the DVD logo in publications or presentations (with an option to request logo art). For more spec and logo information contact DVD Format/Logo Licensing Corporation (DVD FLLC), Shiba Shimizu Building 5F, Shiba-daimon 2-3-11, Minato-ku, Tokyo 105-0012, tel: +81-3-5777-2881, fax: +81-3-5777-2882. Before April 14, 2000, logo/format licensing was administered by Toshiba.
ECMA has developed international standards for DVD-ROM (part 1, the smallest part of the DVD spec), available for free download as ECMA-267 and ECMA-268 from www.ecma-international.org. ECMA has also standardized DVD-R in ECMA-279, DVD-RAM in ECMA-272 and ECMA-273, and DVD+RW as ECMA-274. Unfortunately, ECMA has the annoying habit of spelling "disc" wrong. Also confusing, if you're not from Europe, is ECMA's use of a comma instead of a period for the decimal point.
The specification for the UDF file system used by DVD is available from www.osta.org.
Many technical details of the DVD-Video format are available at the DVD-Video Information page.
Any company making DVD products must license essential technology patents from the "3C' pool (LG, Philips, Pioneer, Sony: 3.5% per player/drive, minimum $3.50; additional $0.75 for Video CD compatibility; 3.75 cents per disc), the "6C" pool (Hitachi, IBM, Matsushita, Mitsubishi, Time Warner, Toshiba, Victor: 4% per player/drive, minimum $3, maximum $8; 4% per "DVD Video decoder", minimum $1; 4.5 cents per ROM/Video/Audio disc; 4% of DVD-R/RW/RAM disc, minimum 6.5 cents) and from Thomson (~$1 per player/drive). Patent royalties of 20 cents per disc are also owed to Discovision Associates, which owns about 1300 optical disc patents. Per disc costs are paid by the replicator.
The licensor of CSS encryption technology is DVD CCA (Copy Control Association), a non-profit trade association with offices at 225 B Cochrane Circle, Morgan Hill, CA. There is a $20,000 annual licensing fee, but no per-product royalties. Send license requests to css-license@lmicp.com, technical info requests to css-info@lmicp.com. Before December 15, 1999, CSS licensing was administered on an interim basis by Matsushita.
Macrovision licenses its analog anti-recording technology to hardware makers. There is a $30,000 initial charge, with a $15,000 yearly renewal fee. The fees support certification of players to ensure widest compatibility with televisions. There are no royalty charges for player manufacturers. Macrovision charges a royalty to content publishers (approximately 4 to 10 cents per disc, compared to 2 to 5 cents for a VHS tape).
Dolby licenses 2-channel Dolby Digital decoders or encoders for $0.66. The fee for a system with both a 2-channel decoder and 2-channel encoder is $0.71. Multichannel decoders are approximately $1.50. Philips, on behalf of CCETT and IRT, also charges $0.20 per channel (maximum of $0.60 per player) for Dolby Digital patents, along with $0.003 per disc.
DTS licenses optional DTS decoders.
Dolby licenses MLP decoders for DVD-Audio players.
An MPEG-2 patent license is required from MPEG LA (MPEG Licensing Adminstrator). Cost is $2.50 for a DVD player or decoder card and 4 cents for each DVD disc, although there seems to be disagreement on whether content producers owe royalties for discs.
Many DVD players are also Video CD (VCD) players. Philips licenses the Video CD format and patents on behalf of themselves, Sony, JVC, Matsushita, CNETT, and IRT for $25,000 initial payment plus royalties of 2.5% per player or $2.50 minimum.
Nissim claims 25 cents per player and 78/100ths of a cent for parental management and other DVD-related patents.
Various essential licensing fees add up to over $14 in royalties, and about $0.20 per disc. Disc royalties are paid by the replicator.
Royalties for DVD+R patents are charged by Philips (approximately $0.06 per disc) and Sony (1.5 to 3.5% of disc price). |
|  |  | |  |
|
